THC settings what do you use?

This is the place to talk about and share things related to CNC plasma machines using UCCNC

THC settings what do you use?

Postby Jduke » Thu Nov 24, 2022 8:37 am

I’m running an axbbe and the cnc4pc THC 1 with their ohmic sensor with a hypertherm 45xp and machine torch.

Just getting my THC up and running and it would be helpful to know what would be typical settings for voltage, hysteresis and delay for whatever your cutting.

I cut some 1/4 plate, and didn’t get any torch movements. The THC read the voltage at about 100v but I’m thinking I may have had the hysteresis set to high at 9v. Do I need to turn the hysteresis down?



Thanks
Duke
Jduke
 
Posts: 14
Joined: Sun Nov 22, 2020 3:17 pm

Return to CNC Plasma

Who is online

Users browsing this forum: No registered users and 1 guest

cron