Newbie questions

This is the place to talk about and share things related to CNC plasma machines using UCCNC

Newbie questions

Postby henrik lagesson » Tue Apr 02, 2019 9:47 am

Hello.
I am building a plasma table with
uc300 eth and uccnc .
I have two breakout boards connected .
My plan was to use one board to controll x and y axis and
The limit switches .
And the other board to controll z axis and the thc signals.

I have the machine connected so the motors are running.
But where do i connect the signal to turn on the plasma arc ? Is it spindle relay m3
henrik lagesson
 
Posts: 1
Joined: Tue Apr 02, 2019 9:29 am

Re: Newbie questions

Postby Robertspark » Tue Apr 02, 2019 8:05 pm

Yes M3

It will be fine to use two bobs
Rob
Einstein ― “If you can't explain it to a six year old, you don't understand it yourself”
...working my way through the 1000+ ways things don't work to find the one that does
UC400eth, UC300eth, UCCNC v1.2109, Neuron Lite
UCCNC v1.2108 Macro Manual
Robertspark
 
Posts: 1331
Joined: Sat Sep 03, 2016 4:27 pm
Location: Nr Liverpool, England


Return to CNC Plasma

Who is online

Users browsing this forum: No registered users and 1 guest