Feeds and Speeds Wizard

Here is where you can drop off Examples of WORKING macros,plugins,Gcode programs , macro Wizards etc.
Please give a brief description of what it is and how it works.

Feeds and Speeds Wizard

Postby Vmax549 » Sat Jan 20, 2018 10:28 pm

Here is a Feeds and Speeds calculator to play with. Enter or selct values and press teh calculate button. It is an older wizard but still very functional. See what you think.

Just drop teh File into your Macro folder and call it up from teh MDI (M20726) or assign it a HotKey.

There is a LOT of code in this one(;-)
(;-) TP
Attachments
M20736.txt
(53.79 KiB) Downloaded 57 times
Speeds&Feeds.jpg
Vmax549
 
Posts: 1102
Joined: Sun Nov 22, 2015 3:25 am
Location: USA

Re: Feeds and Speeds Wizard

Postby dezsoe » Sat Jan 20, 2018 11:05 pm

Hi Terry,

This macro is the surface probe generator macro.

And a remark: could you, please, replace @"C:\UCCNC\" with Application.StartupPath+ˇ\\" in your future uploads? I have no UCCNC on drive C: and have no UCCNC folder at all. (At the moment I have 49 versions installed in E:\UCCNCNF\<version> folders, but anyone else can have a folder other than C:\UCCNC. Thanks in advance!)
dezsoe
 
Posts: 492
Joined: Sun Mar 12, 2017 4:41 pm
Location: Csörög, Hungary

Re: Feeds and Speeds Wizard

Postby Vmax549 » Sun Jan 21, 2018 12:29 am

Like I said this is an older one (;-) All teh newer stuf does that.

(;-) TP
Vmax549
 
Posts: 1102
Joined: Sun Nov 22, 2015 3:25 am
Location: USA

Re: Feeds and Speeds Wizard

Postby Vmax549 » Sun Jan 21, 2018 12:55 am

I changed out the File for the proper one(;-).

HUM i just looked at teh file I replaced(surface probing) and it DID have the new routine (;-)

(;-) TP
Vmax549
 
Posts: 1102
Joined: Sun Nov 22, 2015 3:25 am
Location: USA


Return to UCCNC TOOL BOX

Who is online

Users browsing this forum: No registered users and 1 guest

cron