G20 0r G21
Posted: Sat Dec 09, 2017 11:12 amThis plugin will read if Gcode loaded in UCCNC is for mm or inch. Really not sure how this can be of any use but here it is. Maybe I'll further develop it to a Gcode units converter down the road.
You will need to create 2 leds in UCCNC screen edit...... 500 for G20 and 501 for G21.
You will need to create 2 leds in UCCNC screen edit...... 500 for G20 and 501 for G21.
G20orG21.zip- (3.17 KiB) Downloaded 836 times