Macro - Plasma Touch Off Macro for Ohmic and Floating Head,

Here is where you can drop off Examples of WORKING macros,plugins,Gcode programs , macro Wizards etc.
Please give a brief description of what it is and how it works.

Macro - Plasma Touch Off Macro for Ohmic and Floating Head,

Postby Robertspark » Sat Jun 24, 2017 9:24 pm

Plasma Touch Off Macro for Ohmic and Floating Head, using relays to isolate inputs as per PoMo MiniTHC

Basically sometimes you can get false triggering depending upon your setup with noise and floating head (probe) and ohmic inputs.

The PoMo MiniTHC has two relays which means you can isolate the probe and ohmic input when you are not probing, and then just run the macro to enable the inputs when you want them to operate.
http://minithc.com/

...Maybe just another macro to give you some ideas about turning inputs on and off....
Attachments
M1035.txt
(1.35 KiB) Downloaded 64 times
Rob

Einstein ― “If you can't explain it to a six year old, you don't understand it yourself”
UC400eth, UC300eth, UCCNC v1.2046, Neuron Lite.
UCCNC Macro Manual
Robertspark
 
Posts: 615
Joined: Sat Sep 03, 2016 4:27 pm
Location: Nr Liverpool, England

Return to UCCNC TOOL BOX

Who is online

Users browsing this forum: No registered users and 1 guest