Page 1 of 1

Block and Unblock Gcode lines

PostPosted: Mon Dec 17, 2018 11:51 am
by Dan911
I read about this feature in link below and looked useful to have on hand, it will be added to UCCNC in the very near future but in the mean time can you try it here.

viewtopic.php?f=2&t=1682

By adding a forward slash to the beginning of a gcode line this gives you the option to block line if needed with macro #4545, and unblock it with
macro#4646. If you want to add a button to use macro's you will have to change the macro numbering, I suggest the multiple macro plugin that could be found in toolbox forum section.

M4545.txt
(572 Bytes) Downloaded 1071 times


M4646.txt
(616 Bytes) Downloaded 1134 times

Re: Block and Unblock Gcode lines

PostPosted: Mon Dec 17, 2018 12:19 pm
by beefy
Cheers Dan.

Keith.

Re: Block and Unblock Gcode lines

PostPosted: Mon Dec 17, 2018 11:27 pm
by Robertspark
Nice Dan, thanks

Re: Block and Unblock Gcode lines

PostPosted: Fri Feb 15, 2019 2:07 am
by dammogreen
Whoot! I'll try it out. What a great idea ;-) ;-) Thanks for the implementation someday I'll give back with a plugin.