M47 L# function

Here is where you can drop off Examples of WORKING macros,plugins,Gcode programs , macro Wizards etc.
Please give a brief description of what it is and how it works.

Re: M47 L# function

Postby Robertspark » Tue Oct 02, 2018 6:09 pm

Is this not the same as M98 Pxxx Lxxx?

..... From the Mach manual

10.8.5 Re-run from first line - M47
On encountering an M47 the part program will continue running from its first line. It is an
error if:
♦ M47 is executed in a subroutine
The run can be stopped by the Pause or Stop buttons
See also the use of M99 outside a subroutine to achieve the same effect.


https://www.google.co.uk/url?sa=t&sourc ... Ni4XBMowP9
Robertspark
 
Posts: 1892
Joined: Sat Sep 03, 2016 4:27 pm

Re: M47 L# function

Postby Battwell » Thu Oct 04, 2018 10:31 am

i use m47 all the time on the router- for making repeat parts .
i use an m01 at the start
run job code
a move away from fixture move- so it can be reloaded
and m47 for repeat
this way it moves the head away from me and leaves the spindle running ready for next job- just press feedhold off and its away.
press stop when all parts are done.
saves a lot of time and doesnt stress spindle or electronics with constant start/stop
Uc300eth on router and mill.
UK uccnc powered machine sales. https://cncrouter.uk/atc-cnc-routers.htm
Automateanything/duzzit cnc/mercury cnc
Battwell
 
Posts: 819
Joined: Sun Sep 25, 2016 7:39 pm
Location: South Wales. Uk


Return to UCCNC TOOL BOX

Who is online

Users browsing this forum: No registered users and 4 guests