Autoleveler Plugin.

This is where you talk about Plugins. How they are made and how they work, show examples.

Re: Autoleveler Plugin.

Postby cahit » Mon Oct 23, 2017 4:52 pm

Hi,

AutoLevelerCA v1.0045 is out. There are some invisible improvements and support for G81 has been added.
also no more problems with PhCNC...

Have A Nice Day...

Cahit
Attachments
AutoLevelerCA v1.0045.rar
(70.17 KiB) Downloaded 2080 times
cahit
 
Posts: 73
Joined: Thu Jun 09, 2016 6:27 pm
Location: the Netherlands

Re: Autoleveler Plugin.

Postby Greolt » Tue Oct 24, 2017 5:42 am

Thought I would have a look at this but despite trying several times to download, it is corrupted.
Greolt
 
Posts: 229
Joined: Sun Sep 04, 2016 6:22 am

Re: Autoleveler Plugin.

Postby oxycom » Tue Oct 24, 2017 7:04 am

Greolt wrote:Thought I would have a look at this but despite trying several times to download, it is corrupted.


What exactly is corrupted? I was able to download, unpack the archive and run UCCNC with this new plugin DLL. Haven't tested the plugin itself yet though.
oxycom
 
Posts: 1
Joined: Wed Jan 18, 2017 2:06 pm

Re: Autoleveler Plugin.

Postby thegreatwaldo » Tue Oct 24, 2017 7:23 am

Works ok for me

Cheers

Andrew
thegreatwaldo
 
Posts: 174
Joined: Tue Sep 06, 2016 8:28 pm

Re: Autoleveler Plugin.

Postby Robertspark » Tue Oct 24, 2017 8:07 am

Its because its a *.rar file (not a *.zip file).

Use 7-zip, it will open a lot of file types.

Supported formats:
Packing / unpacking: 7z, XZ, BZIP2, GZIP, TAR, ZIP and WIM
Unpacking only: AR, ARJ, CAB, CHM, CPIO, CramFS, DMG, EXT, FAT, GPT, HFS, IHEX, ISO, LZH, LZMA, MBR, MSI, NSIS, NTFS, QCOW2, RAR, RPM, SquashFS, UDF, UEFI, VDI, VHD, VMDK, WIM, XAR and Z.
For ZIP and GZIP formats, 7-Zip provides a compression ratio that is 2-10 % better than the ratio provided by PKZip and WinZip

http://www.7-zip.org/

Opens fine for me
Robertspark
 
Posts: 1892
Joined: Sat Sep 03, 2016 4:27 pm

Re: Autoleveler Plugin.

Postby Greolt » Tue Oct 24, 2017 9:31 am

Used 7-Zip for years. Lol.

Downloaded it twice more with two different browsers. No good

Even tried two different online rar extractors. They all say it's no good.
Greolt
 
Posts: 229
Joined: Sun Sep 04, 2016 6:22 am

Re: Autoleveler Plugin.

Postby Robertspark » Tue Oct 24, 2017 10:26 am

repackaged as a zip (worked fine for me as a RAR with 7-zip), I dont open them directly from the browser anyway but open the file once virus scanned.

It fails when I try to open it directly (as a rar) from the brower as rar is no a registered filetype (well registered to a programme that is if it makes sense).
Attachments
AutoLevelerCA v1.0045.zip
(81.87 KiB) Downloaded 1284 times
Robertspark
 
Posts: 1892
Joined: Sat Sep 03, 2016 4:27 pm

Re: Autoleveler Plugin.

Postby Greolt » Tue Oct 24, 2017 8:13 pm

Still have two copies of the RAR, on my desktop that I downloaded last night. Always download first. Both no good. 7-Zip just says it cannot open them.

Dowloaded again just now. still the same. No idea why I am getting bad downloads.

Anyway your ZIP opened just fine. Thanks for that Rob.

And thanks too Cahit. I will have a look at your plugin.
Greolt
 
Posts: 229
Joined: Sun Sep 04, 2016 6:22 am

Re: Autoleveler Plugin.

Postby cncdrive » Tue Oct 24, 2017 9:38 pm

The Rar downloads and extracts OK at me using Winrar 5.40.
cncdrive
Site Admin
 
Posts: 4695
Joined: Tue Aug 12, 2014 11:17 pm

Re: Autoleveler Plugin.

Postby cahit » Wed Nov 22, 2017 10:39 am

hi,

while working with PhCNC, I have found the following error:
G1 X0.00002 was noted as G1 X-4E-05 in autoleveler, this gives an unknown gcode in UCCNC.

Have this fixed.

good day...
Attachments
AutoLevelerCA v1.0046.rar
(69.42 KiB) Downloaded 1362 times
cahit
 
Posts: 73
Joined: Thu Jun 09, 2016 6:27 pm
Location: the Netherlands

PreviousNext

Return to Plugins

Who is online

Users browsing this forum: No registered users and 1 guest