M10+M11 checkbox on screenset

Here is where you can request new features or special features.

M10+M11 checkbox on screenset

Postby Robertspark » Sat Nov 18, 2017 8:19 pm

I've asked this before but not in the feature request section

Can we have an M10/M11 checkbox, same way as m205/m206, m207/m208, m209/m210, m211/m212 works please on the configuration screen tab please.

It will allow me to keep track of whether it's enabled or not other than monitoring the port+pin for the laser output

Thanks as always
Rob

Einstein ― “If you can't explain it to a six year old, you don't understand it yourself”
UC400eth, UC300eth, UCCNC v1.2104, Neuron Lite.
UCCNC v1.2104 Macro Manual
Robertspark
 
Posts: 686
Joined: Sat Sep 03, 2016 4:27 pm
Location: Nr Liverpool, England

Re: M10+M11 checkbox on screenset

Postby Robertspark » Wed Nov 22, 2017 11:29 am

.... if we can't do a checkbox, LED etc as it would take too long to edit all the screensets....

what about an exec. variable {same as exec.M3on ... M4on.... M7on .... M8on ..... etc}
Rob

Einstein ― “If you can't explain it to a six year old, you don't understand it yourself”
UC400eth, UC300eth, UCCNC v1.2104, Neuron Lite.
UCCNC v1.2104 Macro Manual
Robertspark
 
Posts: 686
Joined: Sat Sep 03, 2016 4:27 pm
Location: Nr Liverpool, England


Return to Feature Request

Who is online

Users browsing this forum: No registered users and 1 guest

cron