Coordinate rotate ( G68 G69 )

Here is where you can request new features or special features.

Coordinate rotate ( G68 G69 )

Postby Robertspark » Wed Sep 14, 2016 7:10 am

G68 rotate coordinates
G69 cancel coordinate rotation

bit of info here http://www.cnccookbook.com/CCCNCGCodeG68G69CoordinateRotation.htm

(does not appear to be RS274, but Fanuc )
Robertspark
 
Posts: 1892
Joined: Sat Sep 03, 2016 4:27 pm

Re: Coordinate rotate ( G68 G69 )

Postby shad » Sun Oct 09, 2016 10:24 am

Yes, It's will be great!
-- Andrew
UC400ETH
UC300ETH-5LPT
NEURON Lite THC
http://neuroncnc.com/
shad
 
Posts: 331
Joined: Thu Sep 15, 2016 5:23 pm

Re: Coordinate rotate ( G68 G69 )

Postby X3msnake » Mon Dec 18, 2017 6:48 pm

Please implement this


We need this to do auto edge detection and work alignment, I could write a simple macro for my stepcraft probe if this was implemented.


https://www.youtube.com/watch?v=amWolMgEM-Q
https://www.youtube.com/watch?v=5j8GJGqLztU
X3msnake
 
Posts: 23
Joined: Mon Dec 18, 2017 4:31 pm

Re: Coordinate rotate ( G68 G69 )

Postby X3msnake » Wed Dec 20, 2017 11:30 pm

+1
X3msnake
 
Posts: 23
Joined: Mon Dec 18, 2017 4:31 pm

Re: Coordinate rotate ( G68 G69 )

Postby cncdrive » Wed Dec 20, 2017 11:37 pm

This is already implemented.
cncdrive
Site Admin
 
Posts: 4695
Joined: Tue Aug 12, 2014 11:17 pm

Re: Coordinate rotate ( G68 G69 )

Postby X3msnake » Wed Dec 20, 2017 11:42 pm

cncdrive wrote:This is already implemented.


Great :)

How / where can we get the new update
X3msnake
 
Posts: 23
Joined: Mon Dec 18, 2017 4:31 pm

Re: Coordinate rotate ( G68 G69 )

Postby cncdrive » Wed Dec 20, 2017 11:45 pm

From the UCCNC software's webpage on our website: http://cncdrive.com/UCCNC.html
And it is not a new update, it was implemented about half year ago.
cncdrive
Site Admin
 
Posts: 4695
Joined: Tue Aug 12, 2014 11:17 pm

Re: Coordinate rotate ( G68 G69 )

Postby X3msnake » Thu Dec 21, 2017 1:02 pm

cncdrive wrote:From the UCCNC software's webpage on our website: http://cncdrive.com/UCCNC.html
And it is not a new update, it was implemented about half year ago.


Greetings

Ok I have checked and in my version 1.2037 G68 does not work neither is listed in the support Gcodes.

You say it was implemented in the middle of the year so I would assume it was in this version?

What am I doing wrong?
X3msnake
 
Posts: 23
Joined: Mon Dec 18, 2017 4:31 pm

Re: Coordinate rotate ( G68 G69 )

Postby X3msnake » Thu Dec 21, 2017 1:09 pm

Ok I installed Version 1.2047 and i see it in the supported Gcodes and it works on MDI

I missed this update because there is no changelog post on the Log forum anouncing this update :\
X3msnake
 
Posts: 23
Joined: Mon Dec 18, 2017 4:31 pm

Re: Coordinate rotate ( G68 G69 )

Postby cncdrive » Thu Dec 21, 2017 1:14 pm

There is a changelog on the forum of every update: http://www.forum.cncdrive.com/viewtopic ... 0&start=40
cncdrive
Site Admin
 
Posts: 4695
Joined: Tue Aug 12, 2014 11:17 pm

Next

Return to Feature Request

Who is online

Users browsing this forum: No registered users and 4 guests

cron