Backlight the part of the path selected in the codeview box.

Here is where you can request new features or special features.

Backlight the part of the path selected in the codeview box.

Postby shad » Sun Oct 09, 2016 10:12 am

It's will be great to backlight the part of the path in the Toolpathview corresponding to the selected gcode line in the codeview box. It's works now when program RUN, but will be very useful in the IDLE mode (for example when operator want to select any code line and scroll codeview box).
Thank you!
-- Andrew
UC400ETH
UC300ETH-5LPT
NEURON Lite THC
http://neuroncnc.com/
shad
 
Posts: 331
Joined: Thu Sep 15, 2016 5:23 pm

Re: Backlight the part of the path selected in the codeview

Postby Derek » Sun Oct 09, 2016 12:30 pm

I second this. It's very helpful with larger files to get you close to the right line number if you are doing a "run from here"
Derek
 
Posts: 341
Joined: Mon Sep 05, 2016 9:57 am

Re: Backlight the part of the path selected in the codeview

Postby ger21 » Sun Oct 09, 2016 12:51 pm

+1
Gerry
UCCNC 2022 Screenset - http://www.thecncwoodworker.com/2022.html
ger21
 
Posts: 2663
Joined: Sat Sep 03, 2016 2:17 am

Re: Backlight the part of the path selected in the codeview

Postby Robertspark » Sun Oct 09, 2016 4:36 pm

+1 too
Robertspark
 
Posts: 1892
Joined: Sat Sep 03, 2016 4:27 pm

Re: Backlight the part of the path selected in the codeview

Postby beefy » Mon Oct 10, 2016 9:17 am

Oooh yeah baby, count me in for that one too.

I use that with Mach3 when doing a mid cut restart with plasma.

Keith.
beefy
 
Posts: 449
Joined: Mon Sep 05, 2016 10:34 am

Re: Backlight the part of the path selected in the codeview

Postby cncdrive » Mon Oct 10, 2016 9:45 pm

OK guys, I'll implement this soon.
cncdrive
Site Admin
 
Posts: 4695
Joined: Tue Aug 12, 2014 11:17 pm


Return to Feature Request

Who is online

Users browsing this forum: No registered users and 6 guests