Raster engrave skip 'whitespace'

Here is where you can request new features or special features.

Raster engrave skip 'whitespace'

Postby 3d0g » Wed Jul 31, 2019 6:54 pm

Request for a future UCCNC release - skip 'rows' where there's no engraving data. For jobs with lots of text, this would be a real timesaver.
Posts: 62
Joined: Sat Apr 14, 2018 1:52 am

Re: Raster engrave skip 'whitespace'

Postby 1.21gigawatts » Tue Aug 13, 2019 3:47 pm

That would seem to be a task that would better be performed before getting to UCCNC. What program are you using to generate the raster? If it could be told to skip whitespace, that would be a plus. If not, you could cobble up something that edits the g-code and removes the raster lines that contain no output . I assume that "output" means a negative Z move. So, if there's a positive X move and Z is not at a cutting depth, just ignore the X move.

Of course, that makes a lot of assumptions, but it's the general idea of how you could do this.
Posts: 10
Joined: Mon Jul 29, 2019 12:07 pm

Re: Raster engrave skip 'whitespace'

Postby Robertspark » Tue Aug 13, 2019 4:48 pm

I suspect that the laser engrave plugin within uccnc and developed by cncdrive is what is being referred to here in this post as it outputs directly to uccnc in motion code (not gcode)
Einstein ― “If you can't explain it to a six year old, you don't understand it yourself”
...working my way through the 1000+ ways things don't work to find the one that does
UC400eth, UC300eth, UCCNC v1.2110, Neuron Lite
UCCNC v1.2110 Macro Manual
Posts: 1495
Joined: Sat Sep 03, 2016 4:27 pm
Location: Nr Liverpool, England

Re: Raster engrave skip 'whitespace'

Postby 3d0g » Wed Aug 14, 2019 5:17 am

Correct. UCCNC does not generate gcode for raster engraving. Hence my feature request.
Posts: 62
Joined: Sat Apr 14, 2018 1:52 am

Re: Raster engrave skip 'whitespace'

Postby Battwell » Fri Nov 01, 2019 10:35 pm

first time testing laser engrave plugin today.
that would definately be good !
even if it went to rapid speed instead of feed speed in laser off areas?
Uc300eth on router and mill
If they say it can't be done- I find a way!
Posts: 504
Joined: Sun Sep 25, 2016 7:39 pm
Location: South Wales. Uk

Return to Feature Request

Who is online

Users browsing this forum: No registered users and 1 guest