Prepare next M6 tool change
Posted: Fri Aug 09, 2024 12:48 pmAfter M6 tool change, I want to prepare next tool slot for next tool change. How to get next M6 tool number on existing Gcode?
forum.cncdrive.com
UCCNC machine control software support forum
http://forum.cncdrive.com/
Prepare next M6 tool change
Page 1 of 1
Posted: Fri Aug 09, 2024 12:48 pmRe: Prepare next M6 tool change
Posted: Sat Aug 10, 2024 1:59 amYou would need to get your post processor to call a macro that would stage the next tool , the HASS post processor does this as a option.
Re: Prepare next M6 tool change
Posted: Sun Aug 11, 2024 9:04 amhaas post processor using what cam software?
Re: Prepare next M6 tool change
Posted: Sun Aug 11, 2024 9:11 amYes , it runs a hass Mcode to prestage the tool.
Re: Prepare next M6 tool change
Posted: Sun Aug 11, 2024 3:28 pmThanks. Now I able to get next tool number.