Hello
I use 2017 Screenset and i want my z axis to remain at clearance plane z value after measuring at fixed plate position .
What i need to write in post processor ?
gcode example with my postprocesor
N183910G1X79.394Y402.241Z-0.092
N183920G00X79.394Y402.241Z6.000
N183930 M5
N183940 M6 T6
N183950 (Tool: Ball Nose 2 mm})
N183960S16000M03
(Pocket 1)
()
N183990G00X20.035Y103.132Z6.000 (here is the problem )
N184000G00X20.035Y103.132Z2.000
N184010G1X20.035Y103.132Z-0.917F600.0
N184020G3X19.935Y103.232I-0.100J0.000F1300.0
only the first part from my postprocesor
+---------------------------------------------------
+ Commands output for rapid moves
+---------------------------------------------------
begin RAPID_MOVE
"[N]G00[X][Y][Z]"
+---------------------------------------------------
+ Commands output for the first feed rate move
+---------------------------------------------------
begin FIRST_FEED_MOVE
"[N]G1[X][Y][Z][F]"
+---------------------------------------------------
+ Commands output for feed rate moves
+---------------------------------------------------
begin FEED_MOVE
"[N]G1[X][Y][Z]"