Job Setup Sheet
Job Layout
Material Border
Material Setup
Material Block:
(X):10" (Y):10" (Z):1"
Home / Start Position:
X:0" Y:0" Z:0.8"
Datum Position:
Z-Zero:Top of Material
XY: Bottom Left Corner
Clearance Z1: 0.2"
Toolpaths Summary
Toolpaths :
2
V-Carve 1
Pocket 1
Tool Name:
[1] V-Bit (90 deg 1.25")
[1] End Mill (0.125 inch)
Time Estimate :
00:01:29
00:00:35
00:00:54
Toolpath: V-Carve 1
Toolpath Info
Time Estimate:
00:00:35
Toolpath Type: V-Carve / Engraving Toolpath
Feed Rate: 100 inch/min
Plunge Rate: 30 inch/min
Spindle Speed: 12000
Tool Info
Tool Name: V-Bit (90 deg 1.25")
Tool Type: V-Bit
Tool Number: 1
Max Cut Depth: 0.107"
Pass Depth: 0.5"
Stepover: 0.0163"
Toolpath: Pocket 1
Toolpath Info
Time Estimate:
00:00:54
Toolpath Type: Pocket Toolpath
Feed Rate: 100 inch/min
Plunge Rate: 30 inch/min
Spindle Speed: 12000
Tool Info
Tool Name: End Mill (0.125 inch)
Tool Type: End Mill
Tool Number: 1
Max Cut Depth: 0.15"
Pass Depth: 0.2"
Stepover: 0.1"